[THIN] Re: HA for CAG to WI

This feature set is called Access Gateway Enterprise and runs on Netscaler 
hardware....


Sent via BlackBerry by AT&T

-----Original Message-----
From: "Chad Schneider (IT)" <Chad.M.Schneider@xxxxxxxxxxxxx>

Date: Tue, 29 Jan 2008 08:29:55 
To:<thin@xxxxxxxxxxxxx>
Subject: [THIN] Re: HA for CAG to WI


Not sure what version of Netscaler.  I thought it was 7.  I know the CAG was 
then Enterprise V8.

>>> On 1/29/2008 at 8:27 AM, <joe.shonk@xxxxxxxxx> wrote:
 
 
 
Which version of Netscaler did you use?  V8.0 has the ICA Proxy built in and 
works great provided you are running on the latest build. 
Joe 
  
 
 
----------------
 
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of 
Chad Schneider (IT)
Sent: Tuesday, January 29, 2008 7:10 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: HA for CAG to WI 
  
 
Lovely...was not aware of this, just purchased a new CAG for implementation. 
 
  
 
The problem I had with the Netscalers, was they were nearly impossible to 
configure as a CAG, SO much more difficult than the true CAG appliance.

>>> On 1/29/2008 at 8:01 AM, <steveg@xxxxxxxxxxxxxx> wrote: 
 

Yes , they are the best at this and can take over the CAG role as welll....

Sent via BlackBerry by AT&T

-----Original Message-----
From: "Chad Schneider (IT)" <Chad.M.Schneider@xxxxxxxxxxxxx>

Date: Tue, 29 Jan 2008 07:58:37 
To:<thin@xxxxxxxxxxxxx>
Subject: [THIN] Re: HA for CAG to WI


I was afraid that would be the answer. 
  
Can this be done with the Netscaler boxes?  Do they have a built in load 
balancing for this type of scenario, for WI?

>>> On 1/29/2008 at 7:53 AM, <steveg@xxxxxxxxxxxxxx> wrote:


External load balancer....

Sent via BlackBerry by AT&T

-----Original Message-----
From: "Chad Schneider (IT)" <Chad.M.Schneider@xxxxxxxxxxxxx>

Date: Tue, 29 Jan 2008 07:43:25 
To:<thin@xxxxxxxxxxxxx>
Subject: [THIN] HA for CAG to WI


We are using a CAG.  Most of our users will go directly to a WI site, with a 
couple applications, one of which auto-launches. 
  
My question, is high availability.  I know I can turn on failover for the VPN 
client connections, but what are my options for HA for those connecting 
directly to a WI. 
  
  
  
Chad Schneider
Systems Engineer
ThedaCare IT
920-735-7615bI+hR{.n+&ޢ8zhVjبjzzZ0)i0zX+b)bI+hR{.n+&ޢ8zhVjبjzzZ0)i0zX+b)����b��I+hR{.n�+������&ޢ��8�z�h�V�jب�jz���zZ0�)���i��0���zX���+��b����)

Other related posts: