[THIN] Re: FR2 install
- From: "Rob Beekmans" <robbeekmans@xxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 4 Jul 2002 23:11:09 +0200
oke, was it getting independent from the England? ...after they kicked us out
some year earlier...
----- Original Message -----
From: Ron Oglesby
To: thin@xxxxxxxxxxxxx
Sent: Thursday, July 04, 2002 8:30 PM
Subject: [THIN] Re: FR2 install
A good fourth of July. Its an American thing.
-----Original Message-----
From: Rob Beekmans [mailto:robbeekmans@xxxxxxxxxxxxx]
Sent: Thursday, July 04, 2002 11:59 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: FR2 install
what's a "Have a good fourth everyone!" ????
grx
Rob
----- Original Message -----
From: Ron Oglesby
To: thin@xxxxxxxxxxxxx
Sent: Thursday, July 04, 2002 12:56 AM
Subject: [THIN] FR2 install
Well I kinda have figured out what is going on with that FR2 install and of
course Citrix has no answer.
Install FR2/SP2 and since it is XPe the install is polling the server, sees
the SNMP service is loaded and tries to install and Event Agent for SNMP for
their NM piece. Issue. We are not using their NM piece and have never installed
it on these boxes. The SNMP service is used for the Compaq utils only.
Anyway, figured this out by having a successful install on another server.
Looked at the server and realized the only thing different is that SNMP and the
Compaq utils were not installed yet.
Asked Citrix if there is anyway to stop their install from automatically
dropping those components in and they say it can't be done. SO I am again in
escalation..
Have a good fourth everyone!
Ron Oglesby
Senior Technical Architect
RapidApp
Office 312.372.7188
Mobile 312.961.2380
email roglesby@xxxxxxxxxxxx
Other related posts:
