[THIN] Re: Cut and paste
- From: "Craig Cameron" <craig.cameron@xxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Thu, 24 Oct 2002 17:51:06 +0100
The software described is called rdpclip.exe it is part of the 2k =
resource kit.
Search rdpclip.exe on M$ site.
Here is where the nightmare begins........are you sure you want to do =
this?
Do you have only SP2? or the latest rdp client?(the one with the pretty =
colours and the picture of a sat dish!)
If so forget it.
However, if not it is wholly possible (I've done it only for the =
following!) :
1. Only works for NT4 Wkstn/NT4 Server/Win2k clients, I never tried on =
98. (Despite what it says on M$ website 95 OSR1 does not work)
2. Only works on RDP clients created prior to SP2 (i.e. from a server =
which is and has never been SP2 or better!) I had to install a new Win2k =
Server + TS then create disks!
3. Does work "sometimes" over VPN (despite M$ saying it doesn't!)
4. You MUST have Virtual Channel running.
5. Luck. Perseverance and patience. (Diet coke, Pizza and Beer also =
help)
Alternatively,
1. You can buy Citrix MF ($$$$$$$$$$$$$$$)
2. Go to www.ncd.com and buy their thinpath software (quite cheap for a
=
small number of users)
3. If you are in the same domain or can access the domain. You can back
=
map a network drive. (advisable to be given only to Admins, or sensible =
people)
4. Search for other software. I imagine there is other software =
available.
Mail me if this is too much for you. I spent many many many many hours =
on this about two years ago...... The scars still remain.
Craig 'Developer Edition' Cameron MCP, MCSE, MCDBA
IT Systems Manager
CARE @ The Park Hospital
Tel : 0115 9667720 Fax : 0115 9667710
E-Mail : craig.cameron@xxxxxxxxxxxx
Web : www.care-ivf.com
-----Original Message-----
From: S=E9rgio Fonseca [mailto:Fonsecase@xxxxxxxxxxxxxxxx]
Sent: 24 October 2002 17:25
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Cut and paste
Hi,
You are trying to copy files. There is a software from Microsoft
that enables you to do it.
-----Original Message-----
From: Orgueil, Vincent (VU HQ) [mailto:Vincent.Orgueil@xxxxxxxxxxx]=20
Sent: quinta-feira, 24 de Outubro de 2002 09:17
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Cut and paste
Hello,
Silly question: does anybody know how to cut and paste from a full =
desktop
to a W2K thin session ? When I try I get the following error message:
"cannot copy file: cannot read from the source file or disk"
Does anybody have a solution ?
Thanks,
Vince
**********************************************
This weeks Sponsor NetX Inc Thin Client
NetX Develops XP and NT Embedded=20
Thin Client Solutions, Easy to Configure,=20
Extremely Secure, and Remotely Managed.
Check out our recently updated website at http://www.netxinc.com
***********************************************
Visit Jim Kenzig of thethin.net at the
Emergent Online Booth #221 at Citrix Iforum 2002!
Register now at:
http://www.citrixiforum.com/registerNow.html
***********************************************=20
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
----------=20
This message may contain confidential information or privileged =
material,
and is intended only for the individual(s) named. If you are not in the
named addressee you should not disseminate, distribute or copy this =
e-mail.
Please notify the sender immediately by e-mail if you have received this
e-mail by mistake and delete this e-mail from your system.=20
E-mail transmission cannot be guaranteed to be secure or error-free as
information could be intercepted, corrupted, lost, destroyed, arrive =
late or
incomplete, or contain viruses. The sender therefore does not accept
liability for any errors or omissions in the contents of this message =
which
arise as a result of e-mail transmission. If verification is required =
please
request a hard-copy version.=20
**********************************************
This weeks Sponsor NetX Inc Thin Client
NetX Develops XP and NT Embedded=20
Thin Client Solutions, Easy to Configure,=20
Extremely Secure, and Remotely Managed.
Check out our recently updated website at
http://www.netxinc.com
***********************************************
Visit Jim Kenzig of thethin.net at the
Emergent Online Booth #26 at Citrix Iforum 2002!
Register now at:
http://www.citrixiforum.com/registerNow.html
***********************************************=20
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
**********************************************
This weeks Sponsor NetX Inc Thin Client
NetX Develops XP and NT Embedded
Thin Client Solutions, Easy to Configure,
Extremely Secure, and Remotely Managed.
Check out our recently updated website at
http://www.netxinc.com
***********************************************
Visit Jim Kenzig of thethin.net at the
Emergent Online Booth #26 at Citrix Iforum 2002!
Register now at:
http://www.citrixiforum.com/registerNow.html
***********************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link.
http://thethin.net/citrixlist.cfm
Other related posts:
