[THIN] Re: Confused on how to allow access to PS4 through AG/AAC

If you enable the VPN functionality of AG, then simply configure the WI to
set the Secure Access settings to Direct (the default option) assuming you
allow access to the subnet of the Presentation Servers through the Access
Gateway / AAC.

 

Or, you can configure the AG just like a CSG server. In the Access Suite
Console for the AAC, go to the Gateway Appliances node, Gateway Appliances
Properties to configure the STAs. Then configure WI to point Secure Access
to Secure Gateway and specify the FQDN of the AG as the Secure Gateway
server.

 

  _____  

From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Matthew Shrewsbury
Sent: Tuesday, February 28, 2006 10:22 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Confused on how to allow access to PS4 through AG/AAC

 

I'm setting up AG/AAC and thought there was a easy way to setup PS4 user
from outside our firewall to tunnel through the AG to the WI and then to PS4
all inside SSL.

 

How do I setup the AG/AAC to force PS4 users to accessing the AAC site to
use SSL when connecting to PS4? Do I still need the CSG? Where do I
configure this on the AAC or WI? I'm sure this is a silly question but any
light would be most helpful. Thanks,

 

Matthew Shrewsbury, MCSE+Internet MCSE 2000 CCA Server+

Senior Network Administrator

Other related posts: