[THIN] Re: Advice for using the shadow key structure

Have a look at these. These may explain your issues. 6.5.4 Does have a dodgy
installer.

http://www-1.ibm.com/support/docview.wss?rs=899&context=SW710&context=SW760&context=SW870&context=SWA40&context=SWA50&context=SWAZ0&context=SWB20&context=SWB40&context=SWCZ0&context=SWD10&context=SWD20&context=SWDZ0&context=SWH30&context=SWL40&dc=D420&dc=D421&dc=D422&dc=D42G3&dc=D424&dc=D425&dc=D428&dc=D410&dc=D412&dc=D413&dc=DB550&dc=D100&dc=D430&q1=msi&uid=swg1LO08076&loc=en_US&cs=UTF-8&lang=all

http://www-1.ibm.com/support/docview.wss?rs=475&context=SSKTWP&dc=DB520&dc=D600&dc=DB530&dc=D430&dc=D410&dc=D700&dc=DB500&dc=DB540&dc=D420&dc=D400&dc=DB510&dc=DB550&q1=6.5.4+msi&uid=swg21206331&loc=en_US&cs=utf-8&lang=en

http://www-1.ibm.com/support/docview.wss?rs=899&context=SW710&context=SW760&context=SW870&context=SWA40&context=SWA50&context=SWAZ0&context=SWB20&context=SWB40&context=SWCZ0&context=SWD10&context=SWD20&context=SWDZ0&context=SWH30&context=SWL40&dc=D420&dc=D421&dc=D422&dc=D42G3&dc=D424&dc=D425&dc=D428&dc=D410&dc=D412&dc=D413&dc=DB550&dc=D100&dc=D430&q1=msi&uid=swg1LO12161&loc=en_US&cs=UTF-8&lang=all
(Fails manually)

http://www-1.ibm.com/support/docview.wss?uid=swg21206459



----- Original Message ----- 
From: "Jeremy Saunders" <jeremy.saunders@xxxxxxxxxxx>
To: <thin@xxxxxxxxxxxxx>
Sent: Wednesday, April 26, 2006 12:47 AM
Subject: [THIN] Re: Advice for using the shadow key structure



Yeh...that's what I'm going to do this morning. I haven't read anything
about these installer issues Mathras has been talking about, but it is
rather concerning.

 Kind regards,

 Jeremy Saunders
 Senior Technical Specialist

 Integrated Technology Services &
 Cerulean
 IBM Australia
 Level 2, 1060 Hay Street
 West Perth WA 6005

 Visit us at
 http://www.ibm.com/services/au/its

 P: +61 8 9261 8412                F: +61 8 9261 8486
 M: TBA                            E-mail:
                                    jeremy.saunders@xxxxxxxxxxx











             "Rick Mack"
             <Rick.Mack@volant
             e.com.au>                                                  To
             Sent by:                  <thin@xxxxxxxxxxxxx>
             thin-bounce@freel                                          cc
             ists.org
                                                                   Subject
                                       [THIN] Re: Advice for using the
             26/04/2006 06:26          shadow key structure
             AM


             Please respond to
                   thin






Hi Jeremy,

That looks like an issue with the installer, since it's basically done a
single-user (as opposed to all users) installation as far as registry
entries are concerned.

An all users installation "ought" to be creating those keys under HKCR, not
HKCU\Software\Classes.

I'm betting that if you export the admin's hkcu\software\classes key, edit
the reg file to change instances of HKCU to HKLM, and import, you'll have
things working fine.

regards,

Rick

Ulrich Mack
Volante Systems
Level 2, 30 Little Cribb Street
Coronation Drive Office Park
Milton Qld 4064
tel: +61 7 32431847
fax: +61 7 32431992
rick.mack@xxxxxxxxxxxxxx

________________________________

From: thin-bounce@xxxxxxxxxxxxx on behalf of Jeremy Saunders
Sent: Wed 26/04/2006 2:13
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Advice for using the shadow key structure



Well...I haven't done much work with Notes, but deploying it manually seems
to work fine. The program itself works okay when deployed through
Installation Manager, but the Send To function fails. After tracking using
Filemon and Regmon I found that users were missing registry keys that were
there for the Administrator (or the account that Installation Manager
uses).

From the Administrator's registry...

HKCU
-Software
--Classes
---.ndl
---.ns2
---.ns3
---.ns4
---.nsf
---.nsg
---.nsh
---.ntf
---CLSID
---Interface
---Notes
---Notes.Link
---Notes.NotesSession
---Notes.NotesUIWorkspace
---TypeLib

Whilst all users only have...

HKCU
-Software
--Classes
---Notes

If I export the Administrator's Classes key and import them to users, the
Send To function works fine. Hence the reason why I wanted to push it out
by the shadow key.

I guess I can always just place this in the HKCR.

As to why it doesn't deploy correctly in the first place, I guess that this
is something I need to work on.

The customer has done most of the work. I've just done the fault finding,
but would be interested in knowing how you deploy it and what changes you
make in HKLM.

Cheers.

 Kind regards,

 Jeremy Saunders
 Senior Technical Specialist

 Integrated Technology Services &
 Cerulean
 IBM Australia
 Level 2, 1060 Hay Street
 West Perth  WA  6005

 Visit us at
 http://www.ibm.com/services/au/its

 P:  +61 8 9261 8412                F:  +61 8 9261 8486
 M:  TBA                            E-mail:
                                    jeremy.saunders@xxxxxxxxxxx











             "M"
             <mathras@blueyond
             er.co.uk>                                                  To
             Sent by:                  <thin@xxxxxxxxxxxxx>
             thin-bounce@freel                                          cc
             ists.org
                                                                   Subject
                                       [THIN] Re: Advice for using the
             25/04/2006 04:26          shadow key structure
             AM


             Please respond to
                   thin






Hello there Jeremy,

I was interested in your requirement for the Lotus Notes 6.5.4 reg keys.
Im using "Send To" fine on Citrix without having to add anything to user
registry hives. Plenty of areas to change but nothing in the users registry
hive has been required.
I do make changes but these are global changes stored in HKLM.
Are you running Notes purely for certain users ? are all users using Notes
?

BTW unrelated..
Did you have issues with the Notes 6.5.4 installer ?
and Do you use the new ini file setting to enable attachments to be
detached
in areas other than the Local temp folder ?

Regards,

M



----- Original Message -----
From: "Jeremy Saunders" <jeremy.saunders@xxxxxxxxxxx>
To: <thin@xxxxxxxxxxxxx>
Sent: Monday, April 24, 2006 12:19 PM
Subject: [THIN] Advice for using the shadow key structure


Hi All,

I'm having problems getting part of the shadow key to populate the
HKCU\Software key, and just want confirmation that what I am trying to do
is supposed to work.

Notes Client 6.5.4 requires some keys in the HKCU\Software\Classes key
structure. It works fine without these keys, but the "Send to" function of
Windows doesn't work without it. So I have placed this info in the
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Terminal
Server\Install\Software\Classes key, hoping that it will populate the
HKCU\Software\Classes structure when the users login, but it doesn't work
on any of the servers. I am wondering if the Classes key structure can
actually be populated like this.

Any advice would be greatly appreciated.

Cheers.

 Kind regards,

 Jeremy Saunders
 Senior Technical Specialist

 Integrated Technology Services &
 Cerulean
 IBM Australia
 Level 2, 1060 Hay Street
 West Perth WA 6005

 Visit us at
 http://www.ibm.com/services/au/its

 P: +61 8 9261 8412                F: +61 8 9261 8486
 M: TBA                            E-mail:
                                    jeremy.saunders@xxxxxxxxxxx









************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************



************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************


************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************



############################################################################
#########

This e-mail, including all attachments, may be confidential or privileged.
Confidentiality or privilege is not waived or lost because this e-mail has
been sent to you in error.  If you are not the intended recipient any use,
disclosure or copying of this e-mail is prohibited.  If you have received
it in error please notify the sender immediately by reply e-mail and
destroy all copies of this e-mail and any attachments.  All liability for
direct and indirect loss arising from this e-mail and any attachments is
hereby disclaimed to the extent permitted by law.
############################################################################
#########

(See attached file: winmail.dat)



************************************************
For Archives, RSS, to Unsubscribe, Subscribe or 
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
************************************************

Other related posts: