[THIN] Re: AW: Re: ICA won't launch

  • From: <christopher.walter@xxxxxxx>
  • To: <thin@xxxxxxxxxxxxx>
  • Date: Tue, 17 Feb 2009 12:07:19 -0500

Try with the actual Administrator account, that will rule out the profile.

________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of 
Jason Patten
Sent: February 17, 2009 11:47 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: AW: Re: ICA won't launch

Will have to see if I can have that done.


On Tue, Feb 17, 2009 at 11:24 AM, Hegg Peter <Peter.Hegg@xxxxxxx> wrote:

Try creating a new local windows user with admin rights and use this to launch 
the connection. I have had a similar problem and we could only fix it by 
creating new user profiles.



Hope this helps...



Peter Hegg

Datacenter

Systems Engineer

MCSE / CCEA / VCP



in4U AG

Werkstrasse 36

3250 Lyss

Tel  +41 32 387 82 19

Fax +41 32 387 81 11

E-Mail: peter.hegg@xxxxxxx<mailto:peter.hegg@xxxxxxx>



Besuche Sie uns im Internet unter: www.in4u.ch<http://www.in4u.ch>

Visitez nous sur Internet: www.in4u.ch<http://www.in4u.ch>

Visit our homepage: www.in4u.ch<http://www.in4u.ch>



Von: thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx> 
[mailto:thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>] Im Auftrag 
von Jason Patten
Gesendet: Dienstag, 17. Februar 2009 16:55
An: thin@xxxxxxxxxxxxx<mailto:thin@xxxxxxxxxxxxx>
Betreff: [THIN] Re: ICA won't launch



Checked Windows firewall, the citrix software has an exemption in to allow it, 
Also, tried turning firewall off and was still unable to  connect.

On Tue, Feb 17, 2009 at 10:43 AM, Gardiner, Jeffrey (H USA) 
<jeffrey.gardiner@xxxxxxxxxxx<mailto:jeffrey.gardiner@xxxxxxxxxxx>> wrote:

We get a similar situation when the local workstation firewall is configured 
wrong.  It looks like nothing is happening, however, the firewall log on the PC 
shows it being denied.



________________________________

From: thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx> 
[mailto:thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>] On Behalf 
Of Jason Patten

Sent: Tuesday, February 17, 2009 10:14 AM

To: thin@xxxxxxxxxxxxx<mailto:thin@xxxxxxxxxxxxx>
Subject: [THIN] Re: ICA won't launch



I will have to try removing the Hardware key,
I did install full PN, no help.
I have right-clicked, saved the ICA file and tried to launch manually, again no 
go.


On Tue, Feb 17, 2009 at 9:58 AM, 
<christopher.walter@xxxxxxx<mailto:christopher.walter@xxxxxxx>> wrote:

Can you download files from a browser or do you have a policy set that 
restricts that?  From the web client try right clicking on the application and 
saving the launch.ica file and running that.



________________________________

From: thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx> 
[mailto:thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>] On Behalf 
Of Jason Patten

Sent: February 17, 2009 9:44 AM

To: thin@xxxxxxxxxxxxx<mailto:thin@xxxxxxxxxxxxx>
Subject: [THIN] Re: ICA won't launch



No error messages that I can see.  It just doesn't launch.  As far as I can 
tell it doesn't even attempt to start a connection.  From looking at task 
manager and I did try FILEMON, i couldn't find any evidence it even tried to 
launch the Wfica process.  Admittedly I am only able to access it through a 
"RescueMe" session.


On Tue, Feb 17, 2009 at 9:35 AM, 
<christopher.walter@xxxxxxx<mailto:christopher.walter@xxxxxxx>> wrote:

What is the error message?  Can you access through the PN client instead of 
using an ICA file?  Is the client coming in through a firewall?



________________________________

From: thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx> 
[mailto:thin-bounce@xxxxxxxxxxxxx<mailto:thin-bounce@xxxxxxxxxxxxx>] On Behalf 
Of Jason Patten

Sent: February 17, 2009 9:04 AM
To: thin

Subject: [THIN] ICA won't launch



I think I posted on this before, but I have a client who still cannot launch 
the ICA files.
I have taken the following steps to no avail
He is running XP SP2 and IE6


1) Un-installed web client and re-installed with Full PN client (version 11)
2) Cleared Temp files in IE.
3) Unchecked "Do not save encrypted files to disk
4) Cleared the HLKM/software/Microsoft/MSLicensing/Store?license00x keys
5) Run wfica32.exe /setup
6) Removed Google and Yahoo Toolbars.
7) Double checked file associations.

I have tried right-clicking and saving the ICA file, then launching it 
manually.  Still no luck
I think next I will try an exorcism.


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________



----------------------------------------------------------------------------

This message and any included attachments are from Siemens Medical Solutions

and are intended only for the addressee(s).

The information contained herein may include trade secrets or privileged or

otherwise confidential information. Unauthorized review, forwarding, printing,

copying, distributing, or using such information is strictly prohibited and may

be unlawful. If you received this message in error, or have reason to believe

you are not authorized to receive it, please promptly delete this message and

notify the sender by e-mail with a copy to 
Central.SecurityOffice@xxxxxxxxxxx<mailto:Central.SecurityOffice@xxxxxxxxxxx>



Thank you





______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Other related posts: