[TechAssist] Re: zenith tv model#sy3272dt #9-1617-01 need parts info please

  • From: "joe weaver" <weavel@xxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 27 Sep 2001 07:09:35 -0400

thanks for the info...but as i stated in my post ..the regulator and
resistors have been replaced...

----- Original Message -----
From: "Shoreline Electronics" <jstielau@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, September 26, 2001 8:10 PM
Subject: [TechAssist] Re: zenith tv model#sy3272dt #9-1617-01 need parts
info please


>
> Your STR53041 could be defective...Also Check Rx3407 & Rx3408 & Cx3413
> 22uf/63v & D3411 15 Volt Supply Shorted
>
> Jeff Stielau
> Shoreline Electronics Repair
> 125 Beechtree Lane
> Westbrook,CT 06498
> 860-399-1861 Voice
> 860-664-3535 Fax
> jstielau@xxxxxxxx
>
> ----- Original Message -----
> From: "joe weaver" <weavel@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, September 26, 2001 5:36 PM
> Subject: [TechAssist] zenith tv model#sy3272dt #9-1617-01 need parts info
> please
>
>
> >
> > hello everyone,
> > this set came in dead ..i replaced qx3401,cx3416,icx3431
> > r3406,r3407....set still wont turn on ..i noticed icx3431 getting real
> > hot..tips show cr3201 could cause this...does anyone have a schematic on
> > this or know the part no.for cr3201...  thanks for any help..
> >
> > william j.weaver KG8CJ
> > weavers electronics
> > 268 w.water st.
> > oak harbor,ohio 43449
> > 1-419-898-4129  phone
> > 1-419-898-5054   fax
> > weavel@xxxxxxxx
> > www.cros.net/weavel
> > "God Bless America"
> >
> > Help make your TechAssist online repair tips
> > database better!  Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with  unsubscribe  in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: