[TechAssist] Re: zenith raster problem

Turn your screen up and see what you have.
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
----- Original Message ----- 
From: <MLee107346@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, February 29, 2004 9:39 AM
Subject: [TechAssist] zenith raster problem


> hi guys i have a zenith chassis on my bench that i worked on model#
> SLS2555S.it had no vertical sweep so i replaced parts with a kit for the
vertical
> section.there was one problem with the kit the ic was off by one number so
i still
> replaced it anyway.i hooked the set up to my test jig and now i dont get
even
> get a raster the screen is just black. i have high voltage.if anyone had
this
> problem. your help would be highly appreciated.by the way the main board
#is
> 9-1334
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
>
>



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: