[TA-A] zenith pvy5265rk, 9-1674, 9-1713, A-17196. has audio but to video

i have a zenith pvy5265rk bigscreen with a 9-1674 sweep and 9-1713 main. the 
original symptom was no video, (no power to the crt's whatsoever) but the unit 
had sound. i found the original 9-1674-2 to have several damaged compnents. all 
of which are available in the common repair kits. i found a replacement board 
(9-1674-3) that had already been repaired for a similar failure. after swapping 
the boards around the unit would power up the video and keep it on as long as 
nothing was plugged into the video input. with a video input plugged in the 
unit would shut down the video only. i dug in further and found the defective 
A-17196-05. after i replaced it the unit with an A-17196-12 it offered no video 
at all again. when you turn the unit out you can hear it start to fire up the 
crt's then it cuts out. are those 2 sweep boards interchangable? thanks -chris
------------------------------------------------------------------------------
Remove: Send a blank email to techassist-request@xxxxxxxxxxxxx with remove as 
subject.
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: http://www.freelists.org/archives/techassist/

Other related posts: