[TechAssist] Re: zeinth 9-1270 module

 
 
There is a qx3201 , and the coil and a solder connection on the diode  caused 
the problem 
 
 
 
 
 
In a message dated 1/31/2005 2:32:00 P.M. Eastern Standard Time, 
_tgolds5559@xxxxxxxxx (mailto:tgolds5559@xxxxxxxx)  
 
 
 
writes:
set came  in dead , found cr4412 had bad connection resoldered it set played 
fine ,  dlelivered back to custome and before i got back to the shop there was 
a  message on machine that the picture was to wide , returned to home and 
found  that the lx3201 coil was over heated and blew the plastic cap off , ,  
questionis " what may have caused that. "replaced coil and set is normal but  
for 
how long is another question , any ideas what caused it in the first place  
thanks for the help -Terry 36" tube 
Terry's Tv &  Electronic's
tgolds5559@xxxxxxxx

-----------------------------------------------------------------------------
Lost  Password:
http://www.tech-assist.org  and select "Login  Problems?".
Email  Archives:
http://www.freelists.org/archives/techassist/





Kirk C  Najarian - Service director 
KCN Electronics 

29150 Minton  Ave 
Livonia Mi 48150-3122
Voice : 313 971 3482 

Proud Member of  Nesda since 2000
Proud Member of Tech Assist Group 2004
Proud Member of  Parts link Group 2003 



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: