Avery; theres no 30v line to the converg. output board, set uses +26 & -26, +5 & -5 plug P780 pins 3 & 4 are +26 Pins 7&8 are -26 (pins 2,5,6 are ground), plug P708 pin 1 is +5 pin 3 is -5 F863&F864 on the power supply panel are the fuses for the +26 & -26 volt lines, hope this helps, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 Avery Boyd wrote: > Would anyone have a print on thus model tn61x81. Need to know why no voltage > going to the converge board. No 30v 24v it uses a str-z4117ic for switch > mode for the power supply, I think? Thanks in advance. Avery > Avery Boyd > 4666B S. Mingo > Tulsa OK 74146 > Phone 918-665-2400 > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/