[TechAssist] Re: thermal coupling pads needed for Zenith convergence IC's.
- From: "Technotronic Dimensions" <steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 21 Oct 2004 20:16:45 -0400
NTE makes a line here:
http://www.nteinc.com/Web_pgs/Thermopads.html
But I am not sure they will fit the STK you have there. I once looked for a
mfr who would sell that by the sheet so you can custom cut your own sizes,
but never found one.
Steve Hearns
Technotronic Dimensions, NY [USA]
WWW.TECHNOTRONIC-DIMENSIONS.COM
1-877-817-9885 (Voice / Fax Toll Free - US Only)
E-Mail: Steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, October 21, 2004 6:09 PM
Subject: [TechAssist] thermal coupling pads needed for Zenith convergence
IC's.
I'm changing the convergence IC's in this PTV and the one thermal coupling
pad is tore on one side. Does anyone know where you get something like this?
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
