Yes i have checked except for damage cassette load assy ,I have also checked the main board and found cold joints on one of the sm. ics. ----- Original Message ----- From: "DOCVIDEO" <DOCVIDEO@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 16, 2001 2:07 AM Subject: [TechAssist] Re: sony vcr model # SLV-N50 > > Make sure the cassette is seating fully in FULL load lock position....wiper arm assy > on cassette load assy could be damaged ..look close at heavy black spring's... > You did not say what you have done...?? Have you checked for dirty tape path.....??? > Cpastan motor bearings?? motor PCB for bad caps & traces. > MONTE MONCRIEF > BAKERSFIELD, CA. > DOCVIDEO@xxxxxxxxxx > ----- Original Message ----- > From: "Junior E Hurdle" <jselectronics@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, November 15, 2001 9:50 PM > Subject: [TechAssist] sony vcr model # SLV-N50 > > > hi techs, > This VCR plays normal for about 2 to 3 minutes , after that the speed of the tape > slowly > increases until the picture looks as if it is out o H sync and the audio is just > noise. > any one knows what causes this problem? > > Thanks > Junior. > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.