[TechAssist] Re: samsung ct6335 flyback arced through crack,new one won't work


The set is 6 yrs old. I had the same with a Samsung original not working so
we replaced it with a working xfmr from a scrap tv from Samsung at their
factory. They do not have any more of these good units any more so I thought
I would try an aftermarket this time.
Wilf Blakey/Blakey TV,Kirkland Lake,Ont
wblakey@xxxxxxxxxxxxxxxx

----- Original Message -----
From: "al.L" <al@xxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: March 21, 2002 10:43 AM
Subject: [TechAssist] Re: samsung ct6335 flyback arced through crack,new one
won't work


>
> Get an original, take the loss and learn from this.Some generics work and
> some don't and non working focus is a dead giveaway.Just for the
experience
> you should probably back up a similar crt on the bench and run it,just in
> case it is a wierd short in the crt.Maybe you can locate a similar set and
> sub.How old is this set?
>    I once bought a similar Samsung at K Mart for the parts,saved  money.
> Good luck al
>
> alleathe@xxxxxxxxxxxxx
> Al Leatherman
> Mine Hill, NJ 07803
> 973-361-5796
> WWW.ALS-TV.NET
>
>
>
>
>
> ----- Original Message -----
> From: "wilfred blakey" <wblakey@xxxxxxxxxxxxxxxx>
> To: "tech assist" <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, March 20, 2002 10:30 PM
> Subject: [TechAssist] samsung ct6335 flyback arced through crack,new one
> won't work
>
>
> > I purchased an aftermarket flyback from Global in Mississauga to replace
> the original which has a crack in the case and arced to other components
> near. I installed two of these units and got the same results-very low
> brightness and no focus adjustment. In fact the focus also acts as a
> brightness control. When I measure the G2 I get about 15 to 20 volts even
> when I pull the crt socket. I measured the other scan derived voltages and
> most are close enough except the 200v which is about 160v. I believe that
> there is a mistake in the make up of the transformer but the supplier
keeps
> telling me I have a problem in the chassis.I have checked all components
in
> the appropriate areas (abl) and can't find anything wrong.It has taken
about
> three months to get the new part because of back order so the customer has
> been waiting for quite awhile. I do not know what to do anymore so I am
> asking if anyone has a suggestion.
> > By the way the same thing happened with an original Samsung a few years
> ago so I thought I would try an aftermarket instead.
> > Wilf Blakey/Blakey TV,Kirkland Lake,Ont
> > wblakey@xxxxxxxxxxxxxxxx
> >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: