Peter, list the parts that you have already changed, and what are the standby voltages reading ? If pin 16 of U4101 is fluctuating up/down the set will be dead, if the chopper doesn`t have 165 v on the collector it will be dead, if the cathode of CR4116 isn`t 140 volts roughly it will be dead, do you have 5 volts to the micro? do you have clock/data? And lastly if you don`t put up a signature file (name, company name, city/state your going to get an earfull from the techs on this site, post the info and we`ll try to help, Larry E Larry Eastman American TV & Electronics Crystal River, Fl. 34428 Peter G wrote: >dead intermittent dead. changed all parts that tested bad in horiz >deflection and power supply. Unit still dead. Need input on this set. > >***************************************************************************** >Classifieds! Buy or Sell! >http://sell.tech-assist.org >The Tech Address Book: >http://www.tech-assist.org/secure/tip/contact.htm >Add a Repair Tip Here, or Change/Remove your Email Address: >http://www.tech-assist.org/secure/tip/main.htm >Lost Password: >http://www.tech-assist.org and select "Lost your Login Info?". >Email Archives: >//www.freelists.org/archives/techassist/ > > ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/