[TechAssist] Re: rca f3567mbfm1 = ctc187cl3 sams #3672
- From: "Robert Herring" <supertek66@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 19 Nov 2001 13:07:31 -0600
check your b+ supply resistor for the Horizontal driver make sure it has not
increased in resistance, also change filter cap on this same line
Robert
supertek66@xxxxxxxxxxx
robert_herring@xxxxxxxx
H&H Electronics Inc
Dallas,Tx. 75233
----- Original Message -----
From: "Richard Golden d.b.a. Golden Video Repair Center"
<reldong@xxxxxxxxxxx>
To: "techasst" <techassist@xxxxxxxxxxxxx>
Sent: Friday, November 16, 2001 1:44 PM
Subject: [TechAssist] rca f3567mbfm1 = ctc187cl3 sams #3672
> rca ctc187cl3 replaced fly,hot,cr4701,set works but hot is running hot to
the touch,and fly seems hot also.?
> any common cure for this?? cap.or diode?
> thanks Richard
>
> *****************************************
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> *****************************************
> To UNSUBSCRIBE write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
