[TechAssist] Re: rca

Here is an excerpt from one of my previous posts:

The set that would loose horizontal sync is
fixed and gone. As previously posted, the cure was to replace RV001 (15K
surface mount, part# 256743), CV006 (part# 256858), and CV007 (part#
244072). All of these components are off of pin 17 of IV001.

Bob Waterman, CET® #RI-28
Master Technician License #9109
Service Manager / Parts Manager
Gemini Computer, TV, & Security Alarms
(508)695-7302
(508)695-7769 FAX
geminitv@xxxxxxxxxxx
geminitv@xxxxxxx
www.geminicomputertvsecurityalarms.com


----- Original Message ----- 
From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, June 30, 2004 1:44 PM
Subject: [TechAssist] rca


> Working on a RCA model 27r410t chassis ITC008
> Set plays for long time OK. Change channels or remove ant set goes to
horiz
> lines,but on screen display OK. Any ideas will help Thanks. Avery.
> Avery Boyd
> 4666B S. Mingo
> Tulsa OK 74146
> Phone 918-665-2400
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: