[TechAssist] Re: pt-51g36ce convergence problem

have not seen any problems with eeprom on that model
but, if needed it will need re-alignment.
You possibly just need to replace STK's and maybe some low ohm resistors.
Robert
tvservice@xxxxxxxxxxxxx
H & H Electronics Inc
http://supertek.igniteinc.biz

----- Original Message ----- 
From: "D Trippel" <dtrippel@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, December 27, 2005 6:12 PM
Subject: [TechAssist] pt-51g36ce convergence problem


> Hello Everyone!
>
> A customer called with a pt-51g36ce  with poor convergence. I have heard
> ic 7102 the eprom has been a problem with this set.Does the new eprom
> come pre-programed?  The reason I am asking is that I have a fairly
> small shop and I would rather not have a big monster set taking up room
> for too long.  Have any off you guys had experience with  this set. Do I
> have hours of fun ahead of me resetting the convergence after eprom
> replacement.  Any help would be appreciated. Thanks!
>
> Don Trippel
> Don's Electronics
> Rothern,Sask
> Canada
>
> --------------------------------------------------------------------------
---
> This Email List is accessible to the general public through search
engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: http://www.freelists.org/archives/techassist/

-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines. 
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: http://www.freelists.org/archives/techassist/

Other related posts: