[TechAssist] Re: (no subject)

  • From: HSWAD@xxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Fri, 8 Feb 2002 12:41:08 EST


                                                                              
                                             I'll try that and I thank you 
for your help. Hollis                                                         
       In a message dated 2/8/02 11:14:46 AM Eastern Standard Time, 
greentron@xxxxxxxxxxxxxxxx writes:

<< Subj:     [TechAssist] Re: (no subject)
 Date:  2/8/02 11:14:46 AM Eastern Standard Time
 From:  greentron@xxxxxxxxxxxxxxxx (J Silverman)
 Sender:    techassist-bounce@xxxxxxxxxxxxx
 Reply-to:  techassist@xxxxxxxxxxxxx
 To:    techassist@xxxxxxxxxxxxx
 
 
 Sounds like the deck micro is confused, but make sure the unit is not is
 some sort of function lock mode. Assuming you have the original remote, some
 of them had a vcr1, vcr2 select. Either way, try holding the power or vr1,
 vcr2 button down for at least 10 seconds. If that doesnt bring any results,
 check the deck mechanism. A malfuntioning mode switch can confuse the micro
 and a broken pin on the die-cast function lever under the cam gear can cause
 other problems.
 There are other possibilities but most of them are nasty and difficult to
 diagnose.
 Jerry Silverman
 Greentron Inc
 4 Newland Ave
 Greenville SC 29609
 864 232 3889
 Fax 271 2080
 mailto:greentron@xxxxxxx
 ----- Original Message -----
 From: <HSWAD@xxxxxxx>
 To: <techassist@xxxxxxxxxxxxx>
 Sent: Thursday, February 07, 2002 12:37 PM
 Subject: [TechAssist] (no subject)
 
 
 >
 > here is one for you: RCA model T19060GY, Chassis TVCR2/2B. when plugged
 into
 > AC set comes on immediately. Has Video and sound but no pushbuttons work
 at
 > all. Remote has no effect. It tape is inserted it will load it but not
 play
 > or eject it. Help please. Hollis Bates, Lewiston, Maine
 > ------------------------------------------
 > Make your TechAssist database better!
 > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
 > ------------------------------------------
 > To UNSUBSCRIBE your email address, click here:
 > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
 > Or send a BLANK email with unsubscribe in the
 > SUBJECT field to the address above.
 >
 
 ------------------------------------------
 Make your TechAssist database better!  
 Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
 ------------------------------------------
 To UNSUBSCRIBE your email address, click here:
 mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
 Or send a BLANK email with unsubscribe in the
 SUBJECT field to the address above.
 
 
 
 ----------------------- Headers --- >>
------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: