[TechAssist] Re: mitsubishi vs 6002 blows hor out

From: peggs <peggs@xxxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx,"techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
Date: Wed, 31 Jul 2002 15:02:25 -0500

there may be a couple of Caps in the PS that have leaked.
If so,replace them and check continuity to every solder pad
on each trace. The leakage will destroy the trace,and the result
may be that it eats HOT's.......been there

Peggs

At 12:27 PM 7/31/02 -0400, Thomas Woodward wrote:
>
>I have a mits vs 6002 that blows the hor out within an hour
>I have changed a few electrolytic in the hor drive and the damper diodes
>per mits
>no luck
>Thanks for looking
>Tom
>
>
>--
>Thomas S. Woodward
>Multimedia Support Technician
>Master tech 09165  A+
>Simmons College
>300 The Fenway
>Boston Ma. 02115
>617-521-2764
>617-719-3954 (Cell)
>mailto:woodwart@xxxxxxxxxxx
>
>
>
>------------------------------------------
>To REMOVE your email address, click here:
>  http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
>  http://www.tech-assist.org/change.html
>------------------------------------------
>***NEW*** Tips Added Instantly!!!***
>Submit Repair Tips here: 
>http://www.tech-assist.org/secure/tip/
>
Peggs' Electronics
1519 West 2nd Street
Owensboro,KY 42301
270-926-4968
fax 270-686-7399
------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

References:

[TechAssist] mitsubishi vs 6002 blows hor out
From: Thomas Woodward

[TechAssist] Re: mitsubishi vs 6002 blows hor out

Other related posts: