I gave the info below , but its for the older units. disregard. How ever the newer units have Samsung magnetrons that always go bad and sometimes take out the diode. The Magnetron is still in Warranty Phillip R. Hull STET phil245@xxxxxxxxxxxxx FAX 517-569-2242 ----- Original Message ----- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, December 26, 2003 4:19 PM Subject: Re: [TechAssist] microwave > These units always get bad solder connections on the smart board. behind the > control panel. remove, turn over and you will see atleast one burnt > connection, clean and resolder check all the others too. > Phillip R. Hull STET > phil245@xxxxxxxxxxxxx > FAX 517-569-2242 > ----- Original Message ----- > From: "Ed" <edb3@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, December 26, 2003 9:31 AM > Subject: [TechAssist] microwave > > > > anyone here experianced on microwave ovens? This is a GE over the stove > type, quit heating this morning. Maybe there are some common failures i > should look for, its a 1998 model GE, model JVM1450WA > > > > Ed Video Pro-Tech > > Mesa AZ > > > **************************************************************************** > * > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/