[TechAssist] Re: microwave

Thanks for the info, gives me a good place to start
     ED    Video Pro-Tech
               Mesa AZ
----- Original Message ----- 
From: "Technotronic Dimensions" <Steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, December 26, 2003 8:26 AM
Subject: [TechAssist] Re: microwave


> No - Magnetron's ok.  I did a Panasonic a long Time ago that wouldnt heat.
> It turns out the Spade Lug they crimped at the Factory for one of the
Leeds
> to the Magnetron as not done Correctly. It was loose causing that spot to
> heat up after it had ran for any decent length of time. As it heated, it
> built a Resistance, and was in effect an open connection.
>
> I Cut it off, and Soldered the Wire to the Terminal on the Magnetron -
case
> closed.
>
> Steve Hearns
> Technotronic Dimensions, NY (USA)
> 1-877-817-9885 (Voice / Fax US Only)
> WWW.TECHNOTRONIC-DIMENSIONS.COM
>
>
> ----- Original Message ----- 
> From: "Ed" <edb3@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, December 26, 2003 9:59 AM
> Subject: [TechAssist] Re: microwave
>
>
> Really havent checked anything yet, have never workedon one, just wanted
to
> get some ideas. I will pull it down later today, heated up a cup of coffee
> and it worked fine, the next cup it wouldnt heat, everything else is
running
> ok. Does the magnatron usually go that fast?
>     Ed   Video Pro-Tech
>             Mesa AZ
> ----- Original Message ----- 
> From: "Doug Keller" <dek@xxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, December 26, 2003 7:49 AM
> Subject: [TechAssist] Re: microwave
>
>
> > fuse?, power to trans?, HV? magnetron? What have you checked so far?
> >
> > Doug Keller
> > Wis-Kel Electronics
> > 101 Freeland Ave.
> > Terra Alta, WV
> > USA        26764
> > dek@xxxxxxxxxxxxxx
> > http://www.tech-assist.org
> > "Learn from the mistakes of others, because you
> > won't live long enough to make them all yourself"
> >
> >
> >
> > Ed wrote:
> >
> > >anyone here experianced on microwave ovens? This is a GE over the stove
> type, quit heating this morning. Maybe there are some common failures i
> should look for, its a 1998 model GE, model JVM1450WA
> > >
> > >       Ed   Video Pro-Tech
> > >                Mesa AZ
> >
>
>***************************************************************************
> **
> > >Lost Password:
> > >http://www.tech-assist.org  and select "Login Problems?".
> > >Email Archives:
> > >http://www.freelists.org/archives/techassist/
> > >
> > >
> > >
> > >
> > >
> >
>
****************************************************************************
> *
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > http://www.freelists.org/archives/techassist/
> >
>
>
>
****************************************************************************
> *
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
>
>
>
****************************************************************************
*
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
>


*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: