[TechAssist] Re: magnovox ts2575 25f800 chassis

last try on this one . does anyone know what the b+ is supposed to be on
this model manual calls for 140v , 11v 16v. i have 129v 9v, 13v. the
regulator monitors the 11 volt line. i raised the 11 v line to 13v and the
feed back curcuit turned the output voltage down. which tells me the curcuit
could be working. then why is the voltage low on the outputs. checked
reference voltage on the regulator and everything seems normal.look below
for more info.
al marquardt
ampm@xxxxxxx
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 29, 2001 7:16 AM
Subject: [TechAssist] Re: magnovox ts2575 25f800 chassis


>
> that is the problem it could be an error on the manual, but i'm starting
to
> think the regulator isn't working right.
> al marquardt
> ampm@xxxxxxx
> ----- Original Message -----
> From: "Damon" <DAMON101@xxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, November 28, 2001 7:37 PM
> Subject: [TechAssist] Re: magnovox ts2575 25f800 chassis
>
>
> >
> > I think the 129 volts you're getting is normal, 140 volts is not.
> > Damon Brunger
> > damon101@xxxxxxxxxxxxxx
> > Telrad Electronic Services
> > Ft Wayne, IN 46815
> > ----- Original Message -----
> > From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, November 28, 2001 2:15 PM
> > Subject: [TechAssist] Re: magnovox ts2575 25f800 chassis
> >
> >
> > >
> > > You didn't say whats wrong with unit.
> > > Phillip R Hull
> > > phil245@xxxxxxxxxxxxx
> > > ----- Original Message -----
> > > From: "al m" <ampm@xxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Wednesday, November 28, 2001 1:23 PM
> > > Subject: [TechAssist] magnovox ts2575 25f800 chassis
> > >
> > >
> > > >
> > > >  i'm stuck on this one. manual calls for 140v on main output on
> > > regulator.i
> > > > got 129v checked all outputs for caps and diodes  regulator has
> correct
> > > > voltage on every pin. manual says turn down ac voltage and check
> > > > outputs,same thing did anyone see this before the troubleshooting
> guide
> > is
> > > > vague on what to do, it doesn't tell what to check if the voltages
are
> > > wrong
> > > > only if they're not there. any tricks would be appreciated been on
> this
> > a
> > > > long time and am in the same spot   duh!!!!!
> > > > al marquardt
> > > > ampm@xxxxxxx
> > > >
> > > >
> > > > =================================
> > > > Help make your TechAssist database better!
> > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > > =================================
> > > > To UNSUBSCRIBE your email address, click here:
> > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > >
> > > >
> > >
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> > >
> >
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
> >
> >
>
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
>


=================================
Help make your TechAssist database better!  
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe

Other related posts: