[TechAssist] Re: mag projo
- From: "RCJV" <rcjv@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 29 Nov 2001 22:46:51 -0800
well bob i replaced the whole power def pcb and i heard of this im going to
try it on monday you have to remove all 3 ctr leads take out the tubes and
put the rca sealant on all 3 tubes im going to try this on monday ill let
you know if if it wks
thnks everybody
Raul
----- Original Message -----
From: "bob" <bob_whigt@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 29, 2001 7:21 PM
Subject: [TechAssist] Re: mag projo
>
> HI Raul
> I got the same problem with a ptv-755 ,came in with Q802 shorted, i change
> it worked good for 3days i let it go, it came back in 3 days Q802 out,
> change the hold down caps, return,retrace diode ,did some resolder. I let
> the set on 24-10, monitor the b+ it was good.The first day or so i felt
the
> heat sink it was cold, the set ran for six days 24-10, Q802 out.I need to
> get back on this one,if you find some data please post it,I will
> also........bob
> HAVE A GREAT DAY!
> ELECTRON WORLD
> GUTHRIE KY
> ----- Original Message -----
> From: RCJV <rcjv@xxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, November 29, 2001 11:30 PM
> Subject: [TechAssist] mag projo
>
>
> > i would to know if anyone has a web site for magnavox,philips for tv
fixes
> or projections not just the consumer product
> >
> > thank you
> >
> > Raul
> >
> > the ptv that i was having problems with its still with the problem.
ptv835
> blows out q802 i disconnected the blue crt and still blew it i dont know
> what else it could be. if i replace it it wks fine for 2 or 3 days. help
> meeeee pleaseee
> >
> > thank you
> >
> > Raul
> >
> >
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
> >
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
