ok Jeff Ill do it nexttime Perdomo Tv Inc Since 1972 Miami.Fl ----- Original Message ----- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 22, 2004 9:39 PM Subject: [TechAssist] Re: kv32v15 I need training manual fix > Pete, > Please post the model number in the subject line. It could really help someone that may be looking in the > archives for this problem. > Jeff > -- > Intrepid Video TV/VCR Repair > 263 S Front St, Steelton PA 17113 > 717-939-7708; (F) 717-564-4952 > www.intrepid-video.com www.tech-repair.net > ----- Original Message ----- > From: "pete" <tvtech@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, October 21, 2004 8:05 PM > Subject: [TechAssist] Re: I need training manual fix > > > Hi guys > > On my previous post I made a mistake. I said that the tv was a kv27s15, but > it was a kv32v15 not much change but the fix was vdr602,vdr603. when it had > a load connected the vdr would open. !st time Ive seen this. > > > Perdomo Tv Inc Since 1972 > Miami.Fl > ----- Original Message ----- > From: "pete" <tvtech@xxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, October 19, 2004 8:33 PM > Subject: [TechAssist] I need training manual > > > > Hi guys > > I have a kv32v15sony tv . Listen to this story? I went to the house hot > was shorted q601,q602, R607,and r608,unit worked fine. cust said it lasted 1 > week everything shorted again. I went back I forgot to resolder the driver > transformer. I replaced all parts and resoldered the driver. I was testing > the high voltage but I put the high voltage lead too close to the ground, > because I had no picture tube and the tv now goes click,click. If the tv is > in the off position when you plug it in the standby voltage at d617 I have > steady standby voltage. When you hit the power button the standby fluctuates > from 12 to 17 volts. If I disconnect the horiz output and the b plus from > the flyback and jump the relay the power supply runs, and I get my 135v on > pin 2 of the flyback. As soon as I connect the fly It starts click, click > Can anybody out there help me what else can I do to this set? I have my > +15v,-15v,200v,1000v all are there but I can see no picture or sound when I > jump the relay. > > I also have high voltage when i jump the relay. > > > > thank you > > > > Pete > > > > Perdomo Tv Inc Since 1972 > > Miami.Fl > > > > > > --- > > Outgoing mail is certified Virus Free. > > Checked by AVG anti-virus system (http://www.grisoft.com). > > Version: 6.0.776 / Virus Database: 523 - Release Date: 10/12/2004 > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.779 / Virus Database: 526 - Release Date: 10/19/2004 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.779 / Virus Database: 526 - Release Date: 10/19/2004 ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/