[TechAssist] Re: kv32v15 I need training manual fix

  • From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Fri, 22 Oct 2004 22:39:07 -0400

Pete,
Please post the model number in the subject line. It could really help someone 
that may be looking in the
archives for this problem.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com  www.tech-repair.net
----- Original Message ----- 
From: "pete" <tvtech@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, October 21, 2004 8:05 PM
Subject: [TechAssist] Re: I need training manual fix


Hi guys

On my previous post I made a mistake. I said that the tv was a kv27s15, but
it was a kv32v15 not much change but the fix was vdr602,vdr603. when it had
a load connected the vdr would open. !st time Ive seen this.


Perdomo Tv Inc Since 1972
Miami.Fl
----- Original Message ----- 
From: "pete" <tvtech@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, October 19, 2004 8:33 PM
Subject: [TechAssist] I need training manual


> Hi guys
> I have a kv32v15sony tv . Listen to this story? I went to the house hot
was shorted q601,q602, R607,and r608,unit worked fine. cust said it lasted 1
week everything shorted again. I went back I forgot to resolder the driver
transformer. I replaced all parts and resoldered the driver. I was testing
the high voltage but  I put the high voltage lead too close to the ground,
because I had no picture tube and the tv now goes click,click. If the tv is
in the off position when you plug it in the standby voltage at d617 I have
steady standby voltage. When you hit the power button the standby fluctuates
from 12 to 17 volts. If I disconnect the horiz output and the b plus from
the flyback and jump the relay the power supply runs, and I  get my 135v on
pin 2 of the flyback. As soon as I connect the fly It starts click, click
Can anybody out there help me what else can I do to this set? I have my
+15v,-15v,200v,1000v all are there but I can see no picture or sound when I
jump the relay.
>   I also have high voltage when i jump the relay.
>
> thank you
>
> Pete
>
> Perdomo Tv Inc Since 1972
> Miami.Fl
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.776 / Virus Database: 523 - Release Date: 10/12/2004
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.779 / Virus Database: 526 - Release Date: 10/19/2004


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts: