hello; Service switch - small, round opening in the rear cabinet near the Video inputs or the antenna jack (typically early-90's), push and hold while turning the power on - or if there is no service switch on the rear of the TV use the remote control and press within one second of each other: [PWR OFF] - [DISP], [5], [VOL+], [PWR ON] -or- [PWR OFF] - [DISP], [5], [PWR ON] -or- [PWR OFF] - [DISP], [5], [VOL+], [PICTURE], [PWR ON] The TV will turn on in service mode. You may need to set the television into 'tuner' mode (instead of Video-1, etc.) before performing the service mode button sequence. Dang TVCR -----Original Message----- From: Rudolph <rudolph@xxxxxxxxxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Tuesday, November 13, 2001 7:16 PM Subject: [TechAssist] kv27hsr10 >Hi folks > >Need to know how to access the service menu for kv27hsr10 > >***************************************** >Help make your TechAssist online repair tips >database better! Submit your fixes here: >http://www.circuitwork.com/techassist/tip/#tips >***************************************** >To UNSUBSCRIBE write to: >techassist-request@xxxxxxxxxxxxx >with unsubscribe in the subject line. ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.