[TechAssist] Re: hitachi projection 46UX21KA convergence problem

I once had a similar problem - turned out to be liquid on the magic focus
button. Hope this helps!
----- Original Message -----
From: <DonsTVRepair@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, May 30, 2002 1:10 PM
Subject: [TechAssist] hitachi projection 46UX21KA convergence problem


> hi, we're having a problem with the digital convergence on this unit
(hitachi
> projection 46UX21KA).....when you press the "magic focus" button, the
> convergence crosshairs do come up and act as if it will start to do the
> converging.....but, after 3 seconds it will flash red crosshairs then go
back
> to the original white convergence crosshairs.....this process will repeat
> itself every 3-5 seconds.....when i exit the system the convergence is
still
> off.....are all signs pointing to the digital convergence module?
>
> -------------------
> Don's TV Hut
> 1614 S. Combee Road
> Lakeland, FL
>              33801
> 863-668-9033
> donstvrepair@xxxxxxx
>
>
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.tech-assist.org/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>

------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: