[TechAssist] Re: help rca169at2 ps loading

What is the problem now? Dead set, no start up or shuts down?
I have many tips on CTC169 but you have to give us more specific
information.

Gonzalo N. Arrivas, CET Pittsburg, CA
http://www.etechhelponline.com
Tel/Fax: 925-432-2057
----- Original Message -----
From: <f.salemo@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, July 31, 2001 8:55 PM
Subject: [TechAssist] help rca169at2 ps loading


>
>  rca169at2 came in shorted q4401 output transistor,
> replace transistor checked output with tva92 192ma.
> lifted collector leadload ok,figured ac loading. unloded
> secondary flyback, same problem, removed flyback, rang
> 20 rings, hipot 1kvok, primary to secondary ok. lifted
> damper and pin diodes, lc103 checked timing caps,removed
> yoke leadc, took off crt board and anode. when i removed
> q4401load ok.when i opened pin11 on flyback to q4401
> collector load ok. could this be insmps i thought it was
> in h. output? any help appreciated.
>                    f.salemo@xxxxxxx
>                      expert tv
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://geocities.com/circuit_work/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://geocities.com/circuit_work/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: