You may have a bad Pad on the vertical IC. I think I saw the same problem some time back and that was the solution. Scrape the pads and make sure you got good connection. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "joe Wertenberg" <tvjoseph@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, May 23, 2004 4:26 PM Subject: [TechAssist] help philips > still fighting with this one came in short vertical distorted with pairing > esr d caps checked what i could so replaced vert out ic tda8359j now burns > up r3488 4.7 ohm going to vert out no print 27t800 7629 2002 model thanks > for any help on this dog ps no print > > > > ruffer @ tv joe wertenberg ft myers fl > > _________________________________________________________________ > FREE pop-up blocking with the new MSN Toolbar - get it now! > http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/