[TechAssist] Re: general question: changing memory accu's

well, the cause of the corrosion *is* the accu, i don't know if i expressed
myself correctly.  If "green stuff" starts to leak out of the accu it will
fail shortly after...  Therefore if i have a set in for repairs and the accu
is leaking, i replace it.  I was just wondering if i could put one in
parallel with the defective or soon to be defective one...

tia
Stefaan Van SLycken
Van SLycken Elektro, Belgium.
----- Original Message -----
From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, November 30, 2002 12:27 AM
Subject: [TechAssist] Re: general question: changing memory accu's


>
> Stefaan,
>
> Unless I have misunderstood the problem, I believe that your concern is
> directed to the wrong area. You should be more concerned with the
corrosion
> and the cause.
>
> If you just replace the memory accu, won't the new accu corroded also?
>
> Locate and eliminate the cause, then neutralize and seal the corroded
area.
>
> This should prevent further corrosion and possible part failure.
>
> Paul W
> C&W Electronics
> Azle Tx
>
>
> ----- Original Message -----
> From: "Stefaan Van Slycken" <vanslycken@xxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Friday, November 29, 2002 2:46 AM
> Subject: [TechAssist] general question: changing memory accu's
>
>
> > Hi.
> > I'm working on a thomson ICC5, and i noticed the 2.4V accu is starting
to
> corrode.  I was wondering: if i desolder this accu, all the channel
presets
> will be lost, can i just put a new accu in parallel over the old one (on
the
> solder side of the chassis, there's room enough), or will the old one
short
> out eventually?
> > BTW on this particual chassis the "loading circuit" consists of a simple
> RC network so it should be able to handle the extra loading current.
> >
> > Thanks for your opinions...
> > Stefaan Van Slycken
> > Van Slycken Elektro, Belgium.
> > ------------------------------------------
> > To REMOVE your email address, click here:
> >   http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> >   http://www.techassist.net/forms/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
> >
> ------------------------------------------
> To REMOVE your email address, click here:
>   http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
>   http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
>

------------------------------------------
To REMOVE your email address, click here:
  http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
  http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here: 
http://www.tech-assist.org/secure/tip/

Other related posts: