[TechAssist] Re: emerson vcr885 bad video "update"

The sound would probably be bad if capstan problem,  It seems like a head
amp problem,  If heads are OK.
Phillip R Hull
phil245@xxxxxxxxxxxxx
----- Original Message -----
From: "TechAssist Admin." <techassist@xxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, August 16, 2001 1:33 PM
Subject: [TechAssist] Re: emerson vcr885 bad video "update"


>
> Joe, the capstan motor could be bad & causing this (not
> turning properly).  You seem to have checked everything else.
> -Clint
>
> http://orpheuscomputing.com
> Clint Hamilton, Owner
> Orpheus Audio/Video & Computing
> Tech-Assist Administration
> http://tech-assist.org
> techassist@xxxxxxxxxxxxx
> (PLEASE include previous correspondence
> if replying to this email!!)
>
> ----- Original Message -----
> From: "joe weaver" <weavel@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, August 16, 2001 11:52
> Subject: [TechAssist] emerson vcr885 bad video "update"
>
>
>
> i checked sm caps and resistors on drum and capstan
> board..all check
> good...rf modulator and tuner are good.
> thanks everyone for their suggestions so far..
> joe
>
>
> this vcr came in with video looking like bad heads..scrambled
> picture like
> no sync..
> i checked tape guides/back tension etc..changed heads no
> change.. audio from tape is ok...E-E tuning ok..capstan belt
> ok.. no change
> at different speeds...
> any help would be greatly appreciated....thanks joe
>
>
>
>
>
>
>
>
>
>
> william j.weaver KG8CJ
> weavers electronics
> 268 w.water st.
> oak harbor,ohio 43449
> 1-419-898-4129  phone
> 1-419-898-5054   fax
> weavel@xxxxxxxx
> www.cros.net/weavel
>
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>
>
>
> Help make your TechAssist online repair tips
> database better!  Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with  unsubscribe  in the subject line.
>
>

Help make your TechAssist online repair tips 
database better!  Submit your fixes here: 
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx 
with  unsubscribe  in the subject line.

Other related posts: