Are all 3 colors bowed? I had one of the Hitachi built units where all three yokes needed re-adjusted. They fell out of adjustment somehow internally, even though they hadn't been moved. Thanks John Myers Myers TV Service Co. 2212 W. State St. Alliance, OH 44601 Ph: 330-821-6545 mtv_lists@xxxxxxxxxxxxx http://www.myerstv.net "Do or do not... there is no try." -Yoda R&S ELECTRONICS wrote: >Hi Techs >problem: convergence and bowed at top and bottom. Check all 1 olhm resister on >convergence board 9-1690 and replaced the STK 392110 which is sanyo originals, >still convergence is out and cannaot be aligned. >Check R3244 & R3243 they are okay. >>From the remote when I press the source button blue & red are the only >>alignemnt which can be adjusted. The picture is bowed from top and bottom. >Pls let me know if anyone has some tips on this TV. > >Thanks >R&S Electronics,PA >TEL(717)532-6312 >Email:rselect@xxxxxxxxxxxx >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search engines. >Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/