Why not hook your CRT tester up to it and see? I'm sure a large, profitable shop, like yours, has this type of test equipment. Could be open resistors on the CRT board Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "becyn" <becyn@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, April 05, 2004 1:14 PM Subject: [TechAssist] Zenith Z25X22s (9-1808 chas.) smeared pix hello group! This set has good voltages (and clean) at the crt PCB. I also changed some caps just to see... Still a smeared pix. the odd thing is that the screen grid bias is almost at min (160v), otherwise I get saturation. Me thinks it's a bad CRT. Any seconds on that? Jim McVey McVey Alltronix 327 Broadway Newburgh Ny 12550 ph: 845 561 8383 fx: 845 561 9017 Consumer electronics & computer service. Factory authorized for over twenty brands. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/