[TechAssist] Re: Zenith SS2504

  • From: "Ken Dinckan" <kdinckan@xxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Tue, 15 Jan 2002 22:55:36 -0800

check your crt

Ken Dinckan
ALL Tv&Appliance Service
2747 Roosevelt Street # B
Carlsbad CA, 92008
tel: (760)434-1131
fax: (760)434-8856
email to : kdinckan@xxxxxxx
----- Original Message -----
From: "Don" <tvgramps@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, January 15, 2002 5:44 PM
Subject: [TechAssist] Zenith SS2504


>
> Came in with fuse main fuse blown 2 B+ diodes shorted and C3431 had
> vented,changed these parts and installed new STR54041 set fired up with
> video and audio ok. After about 1 minute lost video then shutdown. The
> regulator heat sink was too hot to touch, left unplugged for about five
> minutes and plugged back in, the regulator heat sink started to get hot
> again before the set was ever turned on. I checked the transistor near the
> regulator Q3431 it checked ok. No schematic nothing listed in Sam's for
this
> model.
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>


------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: