Did you make sure you have the full 26V B+ to drive this cct ? Keith Trumbla www.bemelectronics.com Suite 212-530 Century St. Winnipeg Canada R3H 0Y4 Ph.204.775.2875 Fax.204-774-9192 ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: "tech" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 08, 2004 1:06 PM Subject: [TechAssist] Zenith SE3191H Vertical problem. > This set has the 9-700 digital module, 9-605-03 and 9-604-02. Problem is the > vertical looks like it needs to be adjusted to make a full picture, but the > adjustment is at 221 in the service menu which should be close for a full > picture. I have checked or replace all the caps on the 9-605-03 along with > several others on the 9-604-02. Anyone have any old notes on this beast? > > Shaun > > Advanced Electronics > 224 West Riverview Ave. > Fort Morgan, CO 80701 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/