[TechAssist] Zenith Projection TV Z56Z83R8 Convergence trouble
- From: "John Wilkerson" <ctn15261@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 21 May 2002 13:07:01 -0500
Customer brought this set in to the shop. The blue convergence was off and
couldn't be adjusted and the blue lettering on the top of the screen was just
dashes. I checked R3243 and R3244 on the deflection board and they were ok.
Put in new STK392-110 IC's on the convergence board and powered up the tv.
R4163 and R4162 burnt quickly and R4160 and R4161 burned slower on the
convergence board. I had changed these resistors with 1 ohm resistors. Is that
the correct value for these resistors? Any help will be appreciated.
John Q Wilkerson Jr
John Q's TV Repair
Selmer, Tenn 38375
731-632-1144
ctn15261@xxxxxxxxxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.tech-assist.org/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
