[TA-A] Re: Zenith PVR5263MK no picture
- From: "Mike Bates" <mbates17@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 5 Jan 2008 18:30:56 -0500
oh tahts a different chassis than i worked on.... nevermind...
----
Mike
----- Original Message -----
From: "Dan E" <tbkdan3@xxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, January 05, 2008 5:14 PM
Subject: [TA-A] Re: Zenith PVR5263MK no picture
> Hi Mike,
> Thanks for the input. Between what you suggested and
> http://www.anatekcorp.com/faq/protv.htm (1/3 of the way down, question
> P42803-10, same issue on a model that is covered by my service manual), I
> did locate at least one faulty diode (CRX3412). Local Radio Shack didn't
> have anything that was suitable, so I'll have to either locate a
> specialist or order one online. Anybody know any shops in the Rochester
> area? :)
>
> I did not find any fuses that had blown anywhere. I don't have a scope
> handy so I can't check the HOT (would I be correct in assuming the
> aforementioned site is correct and it is the QX3200 transistor?).
>
> Again, I am not experienced in TV repair, so if I'm looking in the wrong
> spots, please let me know :) If I am looking in the right spots, are
> there any other components I should check since that diode was definitely
> bad?
>
> For your convenience, I put two versions of the schematics of the power
> board on imageshack; I don't suggest viewing them unless you're on a
> broadband connection.
> http://img169.imageshack.us/img169/558/page2jq3.jpg
> http://img145.imageshack.us/img145/8162/page1nn1.jpg
>
> Thanks again, I really appreciate the help :-)
>
> Dan
>
> Mike Bates <mbates17@xxxxxxxxxxxx> wrote: sounds like the HOT is blown and
> the supply fuse to the B+ is gone with it.
>
> i had similar PVR chassis do the same thing, it was the HOT, fuse, and
> flyback.
>
> ----
> Mike
>
>
>
> ----- Original Message -----
> From: "Dan E"
> To:
> Sent: Friday, January 04, 2008 10:31 PM
> Subject: [TA-A] Zenith PVR5263MK no picture
>
>
>> Hi, I want to start off by saying that I am not experienced in repairing
>> TV's, but I am somewhat knowledgeable in general electronics. I received
>> this projection TV from a friend, and got the service manual online. It
>> powers up and audio comes on (I can raise and lower the white noise from
>> the
>> buttons on top), but I don't get any picture at all; the CRT's don't
>> light
>> up. The previous TV I worked on had a somewhat more straightforward
>> troubleshooting guide, while this one is somewhat more complex :P I was
>> just looking for some generic tips of what I might starting looking for
>> or
>> if someone knows off the bat what is wrong *crosses fingers* :-) It
>> might
>> be worth noting that this TV has been repaired before, and it is somewhat
>> obvious by the less-than-pretty wiring jobs on some of the boards.
>>
>>
>> Thanks for any help you may offer, and let me know if I can clarify
>> anything.
>>
>>
>>
>> Dan
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Remove: Send a blank email to techassist-request@xxxxxxxxxxxxx with
>> remove
>> as subject.
>> Set Vacation
>> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>> Lost Password: http://www.tech-assist.org and select "Login Problems?".
>> Email Archives: http://www.freelists.org/archives/techassist/
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.516 / Virus Database: 269.17.13/1209 - Release Date:
>> 1/4/2008
>> 12:05 PM
>>
>>
>
> ------------------------------------------------------------------------------
> Remove: Send a blank email to techassist-request@xxxxxxxxxxxxx with remove
> as subject.
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: http://www.freelists.org/archives/techassist/
>
>
>
> ------------------------------------------------------------------------------
> Remove: Send a blank email to techassist-request@xxxxxxxxxxxxx with remove
> as subject.
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org and select "Login Problems?".
> Email Archives: http://www.freelists.org/archives/techassist/
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1210 - Release Date: 1/5/2008
> 11:46 AM
>
>
------------------------------------------------------------------------------
Remove: Send a blank email to techassist-request@xxxxxxxxxxxxx with remove as
subject.
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: http://www.freelists.org/archives/techassist/
- References:
- [TA-A] Re: Zenith PVR5263MK no picture
- From: Dan E
Other related posts:
- » [TA-A] Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- » [TA-A] Re: Zenith PVR5263MK no picture
- [TA-A] Re: Zenith PVR5263MK no picture
- From: Dan E