[TechAssist] Re: Zenith PROJO PVR 5263 distorted pix

Try increasing the vertical size a little..

     Jorge



At 09:17 p.m. 30/04/03 -0400, "Bill Dravenstott" <cdravens@xxxxxxxxxx> wrote:
>Hi all,
>
>This set came in with a picture that looked like severe pincushion 
>problem.  I found the 26volt source to convergence (9-1318-2) 
>missing.  Repaired power supply(9-1302-7) now set has a light color at 
>top.  I will call it a smile shape. It is most noticeable with a light 
>background. No matter if any guns are covered the distortion remains.
>
>I can't discover any distortions in voltages.  There is no sensitivity to 
>cold or heat.  Any ideas where to look?
>
>Bill Dravenstott
>Elza's Home Store, LTD
>Ashland, OH
>419-289-8864
>cdravens@xxxxxxxxxx
>*****************************************************************************
>The Tech Address Book:
>http://www.tech-assist.org/secure/tip/contact.html
>Add a Repair Tip Here, or Change/Remove your Email Address:
>http://www.tech-assist.org/secure/tip/main.html
>Lost Password:
>http://www.tech-assist.org  and select "Lost your Login Info?".
>Email Archives:
>http://www.freelists.org/archives/techassist/



Jorge Camboni, GY Electronics, Richardson, TX

*****************************************************************************
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.html
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.html
Lost Password:
http://www.tech-assist.org  and select "Lost your Login Info?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: