Hi you need to use a normal remote for Zenith. Hold down the menu button until menu goes off the press 9,8,7,6 Enter should bring up service menu but if you have channels blocked out you might need a master remote for motels but I really don't think so a normal remote should get it done ----- Original Message ----- From: "John Florea" <Watcher000000000@xxxxxxxxxxx> To: "techassist" <techassist@xxxxxxxxxxxxx> Sent: Friday, November 16, 2001 9:59 PM Subject: [TechAssist] Zenith Model H2522Y > I have a motel that has a Zenith model H2522Y that has some of the channels locked out. Does anyone out there have the procedure to get into the service mode on these units to reset the channel lock? > > John @ Affordable Electronics > 6029 Capitol Blvd. S. > Tumwater Wash. 98501 > (360) 786-9507 Voice > (360) 352-0487 Fax > Watcher000000000@xxxxxxxxxxxxxx more from the Web. FREE MSN Explorer download : http://explorer.msn.com > > ***************************************** > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > ***************************************** > To UNSUBSCRIBE write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.