[TechAssist] Re: Zenith Model # B25AO2Z Module 9-2143 ShutsDown

 
Grady, 
not sure if zenith still uses but they where a very common problem with
the zen HV shutdown problems in past models,it was a 4 lead safety cap
off the HO x-sister. "joe"
 
Sender: techassist-bounce@xxxxxxxxxxxxx From: info@xxxxxxxxxxxxxxxxx
(Electric=A0Medic) Date: Mon, Dec 31, 2001, 1:48am To:
techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Zenith Model #
B25AO2Z Module 9-2143 Shuts Down Reply=A0to: techassist@xxxxxxxxxxxxx 
Grady: 
I would check CX3416, or just replace it, should be around 100/35v. I am
not sure if that model has it, but it is a common failure on newer
Zenith sets. 
Perry Bower
Electric Medic
"It's Cheaper to Keep Her"
3850 Washington Road Suite 5b
Martinez, Georgia 30907 
Phone: 706-8MEDIC4 (863-3424)
Phone: 706-863-3474
Fax: 706-863-2316
Website: www.electricmedic.com 
mailto:info@xxxxxxxxxxxxxxxxx
"WE REPAIR WITH CARE" 
More Info: www.augusta-ga.bbb.org/report.html?compid=3D6001278&national=3D=
y 
Factory Trained Authorized Service Center For: GE, KEC/KTV, Konka,
Mitsubishi, Panasonic, Philips Magnavox, Pioneer, ProSCAN, RCA, Samsung,
Sharp, SONY, Technics, Zenith 
Provide Extended care for: AON, Circuit City, GE Contracts, Glass
Agency, Philips Contracts, NEW, Rex 
-----Original Message----- 
From: techassist-bounce@xxxxxxxxxxxxx 
[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of GOMDWIL@xxxxxxx
Sent: Monday, December 31, 2001 1:09 AM To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Zenith Model # B25AO2Z Module 9-2143 Shuts Down 
Hello Gang. Hope everyone had nice Christmas. This Zenith CA Chassis
came in DOA. Mfg. in Oct 2000. This module looks like new. No cracks,
bad traces,or discoloration found. Fuses good. I checked CX3407,
RX3404,ICX3400[SRT53041], resoldered drive trans. I monitered the HV and
when it reach about 28KV it shuts down in about two sec. I've never
worked on this model and I have no schematic. Any help would be
appreciated. Happy New Year----Grady 
GOW TV Serve 
------------------------------------------ 
Help make your TechAssist database better! Submit your fixes here:
http://circuitwork.com/techassist/tip/#tips 
------------------------------------------ 
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=3Dunsubscribe Or send a
BLANK email with unsubscribe in the SUBJECT field to the address above. 
------------------------------------------ 
Help make your TechAssist database better! Submit your fixes here:
http://circuitwork.com/techassist/tip/#tips 
------------------------------------------ 
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=3Dunsubscribe Or send a
BLANK email with unsubscribe in the SUBJECT field to the address above. 

------------------------------------------
Help make your TechAssist database better!  
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts: