[TechAssist] Re: Zenith H27F36DT cannot get out of CAMPORTsetting

  • From: "Barry" <foxhole@xxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Thu, 16 Feb 2006 16:18:59 -0500

Thank you Christopher,
    You made my day. I reprogrammed it and it worked. I found no problem
with the jacks and unplugged the jack panel entirely and it still would not
come out of CAMPORT but the programming worked and the customer didn't mind
looseing the auto select feature.
Best  Regards,
Barry
----- Original Message -----
From: "Christopher Barnak" <cbarnak@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, February 16, 2006 1:18 PM
Subject: [TechAssist] Re: Zenith H27F36DT cannot get out of CAMPORTsetting


> Barry,
> Yes, this is a common problem in our School systems TV's.
>
> The Camport has a switch section to it. When something is plugged
> in it, the TV goes directly to that input no matter what mode your in.
> Your input jack is broken, and the micro thinks something is plugged in
> it.
> You cannot get the jack by itself, but must replace the operations
> input board.
>
> You can go into the setup menu by HOLDING the menu button until the
> meun
> disappears then enter 9876 enter. You can change parameter item 40 to
> defeat the automatic function by setting it to 0 instead of 1. The
> input is no longer
> automatic and must be selected from the menu after doing that.
>
>
>
>
>
> Christopher Barnak, CET
> Norfolk Public Schools
> Electronics Technology
> 966 Bellmore Ave.
> Norfolk, Va. 23504
>
> Phone 757 628 3385
> Fax    757 628 3392
> cbarnak@xxxxxxxxxxxxx
>
>
> >>> foxhole@xxxxxxxxx 02/16/06 10:21 AM >>>
> This hotel series set has CAMPORT on screen and I cannot get to cable
> setting for channels. When I enter channel up or randomly enter a
> channel number an error message says Disconnect Front A/V jacks. there
> is nothing in the jacks. I have been throught all the menus I can find
> (1) setup menu(2) parental lock (3) audio and video menu and can't get
> out of this mode. Has anyone had this probem?
> Thank You,
> Barry MacInnes
> Television Service Clinic
> 2 Church St. W.
> W. Lebanon,NH 03784
> foxhole@xxxxxxxxx
>
> --------------------------------------------------------------------------
---
> This Email List is accessible to the general public through search
> engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login
> Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> --------------------------------------------------------------------------
---
> This Email List is accessible to the general public through search
engines. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation
mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/

-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines. 
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts:

  • » [TechAssist] Re: Zenith H27F36DT cannot get out of CAMPORTsetting