[TechAssist] Re: Zenith A60M91W1 Distorted picture still
- From: "drvcr" <drvcr@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 22 Oct 2004 13:30:06 -0400
Shawn, change R3243 110K on 9-1978. Also check all 3 at 120K on all CRT
boards, sorry can't remember locations.
Don B.
Dr.VCR
20 Hanson Ave
Kitchener, On, Canada
drvcr@xxxxxxxxxx
----- Original Message -----
From: "Shaun" <satguy@xxxxxxxxxxxxx>
To: "tech" <techassist@xxxxxxxxxxxxx>
Sent: Friday, October 22, 2004 12:42 PM
Subject: [TechAssist] Zenith A60M91W1 Distorted picture still
This set was dead when it came in I replaced TX3204 (flyback), Q3200 (horz
out), QX3201, CRX3412, CR3204, CR3206, RX3206 and R3252 some of these parts
came in a kit from Tritronics. Now the set comes on but the picture is
erratic and the convergence looks like it is not working at all. I replaced
the convergence module (9-1690) and it looks the same. I am missing
something on the 9-1978-1 board somewhere, but I have been looking for days
now and can't find the problem anyone have any advice?
Shaun
Advanced Electronics
224 West Riverview Ave.
Fort Morgan, CO 80701
----------------------------------------------------------------------------
-
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
