Try changing these high failure caps in the power supply. C3407 100uf/50v C3428 10uf/50v C3440 3.3uf/50v Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: <pwblakeman@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, January 23, 2002 12:59 AM Subject: [TechAssist] Zenith 9-823 > > This set is reluctant to come on. When it does come on and warm up it > will then turn on & okk ok. > I checked for bad solder connections. There is 132V on collector of > horiz. out transistor when it won't come > on. Bad caps? > > TIA, > > Peter Blakeman > Tyler, Tx > ________________________________________________________________ > GET INTERNET ACCESS FROM JUNO! > Juno offers FREE or PREMIUM Internet access for less! > Join Juno today! For your FREE software, visit: > http://dl.www.juno.com/get/web/. > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.