Ed, {1} Check for 150V across CX3407..if ok {2} Check for 123V at D3409 if no...power supply not working.. ICX3431, QX3401, CX3113 and CX3416 if yes {123V ok} Check standby +15V at CX3431 and standby +5V at ZD3401.. Hope this helps Bob, Bobs tv... Worcester, ma main 508-853-1482 fax 508-853-1480 ----- Original Message ----- From: Tel-Tek Electronics <teltek2@xxxxxxxxxxxx> To: AAAA TECH-ASSIST <techassist@xxxxxxxxxxxxx> Sent: Wednesday, May 29, 2002 12:16 PM Subject: [TechAssist] Zenith 9-1790-1 > > Must be a reasonably new chassis son I have very little on it. > This set is dead, no relay click. Fuses (2) are OK, nothing shorted (H/O and > Regulator) > Just sits there. I have no circuit diagram on this, so would someone send me > in the right direction to what I should check first. Working blind on this > one. > > That's Zenith A25A11D using 1 board....9-1790-1 > > Thanks guys.... > > -Ed- > > Tel-Tek Electronics > Midland, Ont. Canada. > teltek2@xxxxxxxxxxxx > > "Quality will be remembered, long after Price is forgotten" > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/