[TechAssist] Re: Zenith 35" Model #IQ3597BT - Hourglass picture
- From: Larry Eastman <videotech@xxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 12 Dec 2003 09:39:42 -0500
Don, Why not put in a rebuilt module, $89.95 outright at Tri-State
Module ($69.95 exchange) for the
9-1671, working on that monster to component level in the home is crazy,
and it will be an inexpensive
fix for your old customer, Tri-State Module 800-203-7484, Good Luck,
Larry E
Larry Eastman
American TV & Electronics
Crystal River, Fl. 34428
Don Cohen wrote:
>>This is a repost of one I tried to post to TechAssist in November, but it=
>>
> was rejected. I somehow got booted from the list. I finally got around to=
> reregistering, so I hope this one gets through!
>
>
>
>>Hello all - it's been awhile!
>>
>>I was called by a neighbor to look at his set that I had previously worked=
>>
> on for another issue. According to the customer, the problem happened after=
> his wife started to clean the screen (sprayed cleaner on the CRT with set=
> powered on). She heard a snap and then the picture went to an hourglass=
> shape. I am not doing much servicing anymore and would like to help the guy=
> out if I can, but there isn't much info available in the way of tips for=
> this set. I'm not in a position to take the set in to work on and trying to=
> diagnose something like this at the customer's site is not exactly=
> desirable because of my present situation. So, maybe someone can at least=
> point me in the right direction from past similar experience, possibly? Or,=
> maybe someone is familiar with this set and has a service manual that they=
> can take a look at and give me a likely thing or two to check (I have no=
> manual). The only thing that I have done thus far is to go into the service=
> menu to make sure that some data just didn't get corrupt. Changing some of=
> the values for relavent parameters did not make any difference, so I=
> suspect a part (or maybe more than one) was damaged.
>
>>The specs on the set are:=20
>>
>>Model: IQ3597BT
>>GZ Chassis, Y Line (1996 Model Year)
>>9-1671-01 SMPS module
>>9-1678-01 Small signal module (main)
>>9-1298-06 Video output module
>>Zenith service manual #923-3300
>>No SAMS available that I could locate
>>
>>Thanks to anyone who can help me out on this,
>>
>>Don Cohen
>>DC Electronics
>>Shinglehouse, PA=20
>>
>
>*****************************************************************************
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
>
>
*****************************************************************************
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
