[TechAssist] Re: Weller/Pace parts

I was thinking of my desoldering station, the glass tube and
tip was about 60 bucks, as I recall. hope I dont need a new
hot tweezers soon.
Maybe I need a different supplier.
Larry




Wayne Vanaman wrote:
> 
> I have not found Pace tips to be expensive, however I solder at a much lower
> temperature than do most techs.  I have tips that are several years old
> still in use, $6 for a tip that lasts a year does not seem excessive to me.
> 
> Wayne Vanaman
> Omega Electronics
> 6904 W Fairfield Dr
> Pensacola, Fl.  32506-3310
> 
> Wayne@xxxxxxxxxxxxxxxxxxxxx
> WWW.PensacolaTVRepair.Com
> 
> 850-456-5995 voice
> 850-458-6369 fax
> 
> ----- Original Message -----
> From: "larry" <schntv@xxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, April 30, 2003 11:35 AM
> Subject: [TechAssist] Re: Weller parts
> 
> >
> > that might work, but wish it would regulate.
> > lol
> > I contacted weller/cooper, and it is not available.
> > also I like pace.
> > I have one, expensive tips though.
> > lol
> > Thanks all,
> > Larry
> >
> >
> > Philip Bader wrote:
> > >
> > > Larry, in a pinch you could plug the station into a simple wall lamp
> > > dimmer assembly like what you mount on a wall to dim a cieling light.
> > > Zero to 120vac.
> > > A crude voltage limiter but effective.
> > > Phil Bader
> > >
> > > larry wrote:
> > > >
> > > > Thank you,
> > > > I called and the part in no longer available.
> > > > This was a 250 dollar station, I will really miss it.
> > > > Is there any way to bypass this board? this is a ceramic
> > > > board, about 2 inch long.
> > > > The temp runs wide open, about 850. and the control readout
> > > > only shows adjustment from 5 to 14 degrees,.
> > > > any schematic would really help.
> > > > Thanks again,
> > > > Larry
> > > >
> > > > Philip Bader wrote:
> > > > >
> > > > > Weller tech assist line: 1-800-476-3030 ext 1    ("Dino")
> > > > > Main line: 919-362-7541
> > > > > Phil Bader
> > > > >
> > > > > larry wrote:
> > > > > >
> > > > > > I need the control board EC237 for my Weller EC4002.
> > > > > > Where can I get one?
> > > > > > Thank you,
> > > > > > Larry
> > > > > >
> > > > > > --
> > > > > > Schneider TV & Electronic Inc.
> > > > > > 5415 N. Wooster ave.
> > > > > > Dover, Ohio 44622       www.geocities.com/schntv2000/
> > > > > > 330-343-0768         FCC. first class & Extra class K8WLY
> 
> *****************************************************************************
> The Tech Address Book:
> http://www.tech-assist.org/secure/tip/contact.html
> Add a Repair Tip Here, or Change/Remove your Email Address:
> http://www.tech-assist.org/secure/tip/main.html
> Lost Password:
> http://www.tech-assist.org  and select "Lost your Login Info?".
> Email Archives:
> http://www.freelists.org/archives/techassist/

-- 
Schneider TV & Electronic Inc.
5415 N. Wooster ave.
Dover, Ohio 44622       www.geocities.com/schntv2000/
330-343-0768         FCC. first class & Extra class K8WLY
*****************************************************************************
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.html
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.html
Lost Password:
http://www.tech-assist.org  and select "Lost your Login Info?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: