Change c2212 22uf 16v cap to left of str regulator facing rear of tv. See if this helps. John Q. John Q Wilkerson Jr John Q's TV Repair Selmer, Tenn 38375 731-632-1144 ctn15261@xxxxxxxxxxxxxx ----- Original Message ----- From: Doug Keller <dek@xxxxxxxxxx> To: TechAssist <techassist@xxxxxxxxxxxxx> Sent: Monday, May 27, 2002 3:39 PM Subject: [TechAssist] Wards MWJ2726 (Zenith 9-1156) > > This set has "jitter" in the top one-third of the picture. It seems to > me that someone once had told me that the infamous regulator circuit in > this could cause this symptom among its myriad of problems. Any tips > will be appreciated as I have thought for years that all zeniths this > old (10 years) had LONG since passed to that big junkyard in the sky. > thanks, > Doug > > -- > Doug Keller "A day without sunshine > Wis-Kel Electronics is like.......night" > 101 Freeland Ave > Terra Alta, WV > USA 26764 > 1-304-789-3165 > dek@xxxxxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/