[TechAssist] Re: VS4551 mitsubishi PTV. intermitt jagged vertical distortion

Yes they mean the connections on the yoke itself.  They can be soldered in
the unit if you're very carefull.  Use a mirror to verify the work you've
done before firing it up.  The crt on the right is the most difficult to get
at--do the blue and green first so you get the hang of where you are going.
Some people drop the yokes to do this but is unneccesary.

TV Doctor
Avalon, Wi.

----- Original Message -----
From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, February 27, 2005 1:10 PM
Subject: [TechAssist] VS4551 mitsubishi PTV. intermitt jagged vertical
distortion


> This played two days OK. Then the vertical distorted like arcing,
> pull-up, lines stretched,bowed etc.
> I did resolder the vert output IC. If I hit the side of the setwhile
> happening it cleared.
> I saw somewhere in a fix email,was to solder the yoke pin.Sounded like
> they meant actually at the yoke (as opposed to on the board) I quote:
>
> "Cure: Found bad solder connection at connector on red yoke. Reason for no
deflection is these connector run in seres to the other two CRT's."
> Anyone care to clarify this?
> Phil Bader
>
>
>
> --
>
> Philip Bader
> Jan Phyl TV Inc. (estab. 1976)
> 3420 Recker Hwy. Winter Haven, Fl. 33880
> Fax (863) 299-8821
> email: tjanphyl@xxxxxxxxxxxxxxx
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 2/25/2005
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/
>
>


-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: