I forgot to describe what I see when CXA1277 (Video Jungle IC or is it 1247 or 1477, you know what i mean) starts to fail. If you can look at the picture it can remain steady, but will intermittantly start to dance vertically. Top and bottom can collapse to different levels, sometimes picture will remain rock solid but center or bottom look stretched or compressed. Note that I never had had any problems with the vert op amp on the D board, always the vert drive signal off of the M. > I have replaced the TWO stk392-010 also IC501 on D board,I > said not conv > output problem,Pix is stretched at bottom vert sweep > changing. > Ron Miller > D.T.V. Texas > > > ----- Original Message ----- > > From: "Ron Miller" <rlmbkm@xxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, November 08, 2001 1:57 PM > > Subject: [TechAssist] KP46S15 Distorted pix,NOT CONV. > problem > > > > > > > > Have changed STK392-010. > > This one hard to describe:pix is basically convergered,pix > > has 3 colored > > lines that flash though pix when blank screen see 3 bowed > > lines,top of pix > > looks like vert sweep changing amplitude.Pix is not out of > > convergence pix > > ix bowed and stretched at bottom. > > This is a interment but changes good to bad quickly,I know > > the jungle > > cxa1477as gives problems in these but is this problem > > somewhere else?Don't > > get many of these, hanks. > > Ron Miller > > D.T.V. Texas > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > ***************************************** Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips ***************************************** To UNSUBSCRIBE write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.